Envirotex Lite Pour-On Resin is a reactive polymer compound that preserves and beautifies any surface with a high gloss finish. It cures to a thick, glossy coating in about 8 hours, and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to produce a high gloss. Envirotex Lite is waterproof, alcohol and heat resistant. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to recoating.
Please note that hard surface epoxy resins tend to "yellow" over time, especially from any or all of the following: too much UV light, high heat while wet and/or curing, if heated too high afterward, if more than 1/2" in thickness (layers no thicker than 1/8" should be poured at a time).
8oz kit contains (x1) 4oz bottle of resin & (x1) 4oz bottle of hardener. It covers approximately 2 square feet. 16oz kit contains (x1) 8oz bottle of resin & (x1) 8oz bottle of hardener. It covers approximately 4 square feet. 32oz kit contains (x1) 16oz bottle of resin & (x1) 16oz bottle of hardener. It covers approximately 8 square feet. 1 gallon kit contains (x1) 64oz bottle of resin & (x1) 64oz bottle of hardener. It covers approximately 32 square feet.
